Sylvania SSC719B1 SET UP for USE, Channel SET UP for First Time, Deleting or Adding Channel

TV/VCR SECTION

SET UP FOR USE

You can program the tuner to scan all the channels you receive in your area.

NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/DVD/VHS channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.

CHANNEL SET UP FOR THE

FIRST TIME

1Plug in the TV/DVD/VHS power cord

Plug the TV/DVD/VHS power cord into a standard AC outlet.

NOTE:

DELETING (OR ADDING)

CHANNEL

The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)

• If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord.

2Turn on the TV/DVD/VHS

Press the POWER button to turn on the TV/DVD/VHS.

1Select “CHANNEL SET UP”

Press the SETUP button on the remote control.

Press the Arrow K or L button to point to “CHANNEL SET UP”. Then, press the Arrow B button.

- TV/VCR SETUP -

TIMER PROGRAMMING SETTING CLOCK

BCHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH INDEX SEARCH

3Select “ENGLISH” or “ESPAÑOL” or

“FRANÇAIS”	– SET UP –
Select “ENGLISH” or	B LANGUAGE
“ESPAÑOL”=Spanish or	[ENGLISH] ESP	FRA
“FRANÇAIS” =French using the	AUTO PRESET
Arrow B or s button. “[ ]” indi-
cate the selected language.
4 Begin auto preset	– SET UP –
Press the Arrow K or L button to
	LANGUAGE
point to “AUTO PRESET”.
	[ENGLISH] ESP	FRA
Then press the Arrow B button.	B AUTO PRESET
The tuner scans and memorizes all
active channels in your area.

NOTES:

•The TV/DVD/VHS distinguishes between standard TV channels and cable channels.

•If you want to play or record a video tape BEFORE presetting the tuner, you must press the SETUP button on the remote control. To preset the tuner again, see “CHANNEL SET UP AGAIN” on page 15.

•The TV/DVD/VHS may memorize TV channels as CATV channels if reception conditions is poor. If this happens, try AUTO MEMO action again when reception conditions are better.

5After scanning

The tuner stops on the lowest memorized channel. If you want to recall the selected channels, you can select the desired channel directly with the remote control number buttons or CHANNEL K or L.

2 Select “ADD/DELETE CH”	– CHANNEL SET UP –
Press the Arrow K or L button to	B ADD / DELETE CH (TV)
point to “ADD/DELETE CH”.	AUTO PRESET

Press the Arrow B button.

3Enter the desired channel number

Press the Arrow K or L button until your desired channel number

appears. (You can also use the num-	08
ber buttons or the CHANNEL K/L	ADD / DELETE
button to enter it) (Example: CH8)

4Delete (or add) it from (into) memory

Press the Arrow B or s button. The channel number changes to light red. The channel is deleted from memory.

•To delete another channel, repeat steps [3] and [4].

•If you press the Arrow B or s button again, the channel is memorized again.

5Exit the channel setup mode

Added channel: Light blue.

Deleted channel: Light red.

Press the SETUP button on the remote control to returns to TV mode.

NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL K or L button.

- 15 - EN

1F12