48.ENTER Button
Press to accept a setting.
49.g (FWD) Button
●DVD mode
Press to fast forward the Disc. Press the PAUSE button, then press this button to begin slow motion playback. Press this button repeatedly to change the forward speed of slow motion.
●VCR mode
Press to rapidly advance the tape, or view the pic- ture rapidly in forward during playback (Forward Search). When setting program (For example: set- ting clock or timer program), press to determine your selection and proceed to the next step you want to input. Press to determine the setting modes from the on screen menu. Press to add or delete channel numbers during channel preset.
50.PLAY Button
●DVD mode
Press to begin playback.
●VCR mode
Press to begin playback. Press to enter digits when setting program (For example: setting clock or timer program). Press to select the setting modes from the on screen menu.
51.VCR Button [page 13]
Press to select VCR mode for the remote control.
●You can switch the OUTPUT mode either by pressing the OUTPUT button on the front panel, or by pressing the DVD or the VCR button on the remote control. However, if you press the OUTPUT button on the front panel first, you need to re- select the corresponding mode by pressing the DVD or the VCR button on the remote control.
52.PAUSE Button
●DVD mode [page 24]
Press to pause Disc playback. Press repeatedly to advance the DVD picture step by step (or one frame at a time).
●VCR mode [page 19]
While recording, press to temporarily stop the recording (pause). Press a second time to resume normal recording. You can not pause a
53.SLOW Button [page 19]
During tape playback, press to view the video tape in slow motion. Press again to resume normal playback. This button does not affect DVD playback.
54.VCR/TV Button [page 21]
Use to select VCR or TV position. If the VCR/TV light appears on the front of the VCR, it is in VCR position (in either VCR or DVD mode). If the VCR/TV light doesn’t appear on the front of the VCR, it is in TV position.
●VCR Position
When the green VCR OUTPUT light appears on the front of the VCR, use the VCR to watch a tape, watch a TV program while recording it, or watch a TV broadcast using the CHANNEL or the Number but- tons to change channels at the VCR.
When the green DVD OUTPUT light appears on the front of the DVD, use the DVD to view Disc playback or menus.
●TV Position
Use to watch TV (changing channels at the TV) or watch one program while recording another.
55.SKIP/CH. Buttons
●DVD mode
Press to skip Chapters or Tracks.
●VCR mode
Press to change TV channels on the VCR.
56.AUDIO Button [page 31]
Press to select a desired audio language or sound mode.
Notes
¡To use the remote control to operate the DVD/VCR COMBINATION UNITS and its features, press the DVD button on the remote control before pressing other DVD buttons. Verify that the green DVD OUTPUT Light is on.
¡To use the remote control to operate the VCR and its features, press the VCR button on the remote control before pressing other VCR buttons. Verify that the green VCR OUTPUT Light is on.
REAR VIEW
ANT - IN
ANT - OUT
CH3 CH4
6766 65
57 | 58 | 59 | 60 |
|
| DVD/VCR | COMPONENT |
| |
| OUT |
| ||
| IN |
| VIDEO OUT |
|
L |
| DVD/VCR | Y |
|
AUDO |
| AUDIO OUT |
|
|
|
|
| DIGITAL AUDIO OUT | |
R |
| L | Cb | |
|
| |||
|
|
| OUT PCM / BITSTREAM | |
|
|
|
| COAXIAL |
VIDEO |
| R | Cr |
|
| 64 63 |
| 62 61 | |
57.AC Power Cord
Connect to a standard AC outlet to supply power to the DVD/VCR COMBINATION UNITS.
58.AUDIO IN Jacks
Connect audio cables coming from the audio out jacks of a camcorder, another VCR, or an audio source here.
– 11 – | EN |
1L25
