Sylvania SSD800 owner manual Operating Controls and Functions

6. TIMER SET Light [page 20]

The Timer light on current VCR does not glow dur- ing One Touch Timer Recording(OTR). It flashes if the TIMER SET button is pressed for a timer record- ing, but there is no tape in the VCR. It flashes when all timer recordings or One-Touch Recordings are

1. Disc loading tray

2. DVD OUTPUT Light (Green) [page 13]

This light appears when the DVD output mode is selected. You can only watch DVDs when the green DVD OUTPUT Light is on. To make the green DVD OUTPUT light come on, press the DVD button on the remote control or the OUTPUT button on the front panel.

3. VCR OUTPUT Light (Green) [page 13]

This light appears when the VCR output mode is select- ed. You can only watch tapes when the green VCR OUTPUT light is on. To make the green VCR OUTPUT light come on, press the VCR button on the remote con- trol or the OUTPUT button on the front panel.

4. CASSETTE COMPARTMENT

5. REC/OTR Light [page 20] Lights up during recording.

55

OPERATING CONTROLS AND FUNCTIONS

FRONT PANEL	1				2		3	4		5	6		7 8	9
													POWER
														VIDEO
				DVD OPERATION		OUTPUT	VCR OPERATION				CHANNEL
												TIMER		L
												SET		AUDIO
												VCR/TV
		OPEN/CLOSE	STOP	SKIP/REV PLAY	FWD/SKIP		STOP/EJECT REW	PLAY	F.FWD	REC/OTR		CST.IN		R
REMOTE CONTROL		25		23	21		19	17		15	13	11
		26	24	22		20	18		16		14	12	10
					finished.

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

POWER SPEED AUDIO

1 2 3

SKIP/CH.

4 5 6

VCR/TV

7 8 9

+100 SLOW

0 +10

DISPLAY DVD VCR PAUSE

PLAY

STOP

RECORD

MENU

ENTER

SETUP TITLE RETURN

MODE ZOOM SEARCH CLEAR/

MODE C.RESET

SUBTITLE ANGLE REPEAT A-B

567. POWER Button [page 17]

Press to turn the power on and off.

8.POWER Light

Lights up when the power is on.

9.VIDEO In Jack

Connect a video cable coming from the video out

54jack of a camcorder, another VCR, or a video source (laser disc player, camcorder, etc.) here.

5310. AUDIO In Jacks

	52		Connect audio cables coming from the audio out jacks
51			of a camcorder, another VCR, or an audio source here.
	50	11.	TIMER SET Button [page 21]
49			Press to put the VCR into standby mode for a timer
			recording.
		12. CST IN Light [page 19]
	48		Lights up when a cassette is in the VCR.
		13.	VCR/TV Light [page 17]
47
			Lights up when the VCR is in the VCR position, and

46goes off when it is in the TV position.

14.CHANNEL Buttons [page 17]

45 In VCR mode, press to change TV channels on the

44VCR; press to adjust the tracking during normal or

43 slow motion playback; press to remove vertical jitter

42in a Still picture.

15.REC/OTR Button (VCR) [page 20]

Press once to start a recording. Press 2 times or more and the unit will record in 1/2 hour increments.

16.F.FWD Button (VCR) [page 17]

Press to rapidly advance the tape, or view the picture rapidly in forward during playback. (Forward Search). When setting program (For example:setting clock or timer program), press to determine your selection and proceed to the next step you want to input. Press to determine the setting modes from the on screen menu. Press to add or delete channel num- bers during channel preset.

17.PLAY Button (VCR) [page 17]

Press to begin playback. Press to enter digits when setting program (For example: setting clock or timer program). Press to advance settings during “on screen menu”.

18.REW Button (VCR) [page 18]

Press to rewind the tape, or to view the picture rapid- ly in reverse during the playback mode (Rewind

Search). Press to cancel a setting of	timer program
when in “on screen menu”. Press to correct digits
when setting program (For example: setting clock or
timer program). Press to add or delete channel num-
– 9 – bers during channel preset.	EN

1L25