LCD “MSG” : Message indicating on LCD
This system will leave a warning message on the LCD panel when the sensors are opened, triggered or in a low battery condition. It also emits 3 short ‘Beeps’ every 10 Sec. to remind you of this. The first 5 messages can be displayed on the LCD. If you want to check or delete the MSG, the system will need to be in the disarm mode. The LCD display is shown below.
00 HOME SECURITY Disarmed MSG
Press the ENTER button to read the message. Press the the next message…etc.
ENTER button again to read
63 DOOR SENSOR
01 Open
Press the
CANCEL
button to delete all ‘MSG’s’. The LCD display is shown below.
MESSAGE DELETED
24 Hour & Home-Away Functions
24 Hour Mode
The Sylvania® security system can work for you 24 hours a day,7 days a week. The system features a 24 hour status capability which is important for use with some accessory sensors. The sensors that belong to the 24 hour mode include the Smoke
Detector, Gas Detector and Remote Control Handset (PANIC button)
A-AWAY and H-HOME modes:
When the system is armed in the HOMEmode, the Main Console will exclude all PIR Detectors, so the user can move freely within the house without triggering the PIR Motion Detector.
When the system is armed in the AWAY mode, all sensors programmed are active and are ready to trigger the alarm
15
