Installation Template
“Installation template for wall mounting of main control panel”
1.Use the template on the right to mark positions for mounting screws to install the main control panel on the wall.
2.Once the mounting screw positions have been marked, drill 3/16” pilot holes and install the plastic wall anchors supplied.
3.Install the mounting screws into the plastic wall anchors so that the heed of the screw extends approximately 1/4” from the wall.
4.Remove the rubber/plugs located at the top 2 holes on the bottom of the main control panel, and line up these holes with the mounting screw heads. Slide the main control panel over the mounting screws and gently push down onto the screws so that it is secure.
26
