5-3
LS 3070 Product Reference Guide: Interface Guide
RS-232C Single Port
Figure 5-2. Connecting Base Station to RS-232C Single-Port Host
Any of the following RS-232C (DB 25) connectors are supported: Male, TxD on
pin 2 or TxD on pin 3. Female, TxD on Pin 2 or Pin 3. For other pinouts and
cable types, contact the Symbol Support Center at 1-800-653-5350.
RS-232C Dual Port
Figure 5-3. RS-232C Dual-Port Mode
This interface involves connecting a Y-cable, for which the male connector is
Port 1 and the female connector is Port 2. For IK-1500, male = TxD on Pin 2 and
female = TxD on Pin 3. For IK-1501, male = TxD on Pin 3 and female = TxD on
Pin 2
Base Station
RS-232C Device
Host
System
(Port 1)
RS-232C Auxiliary
Device (Port 2)
Base
Station