6-2
LS 3070 Product Reference Guide: Programming
Scanning Sequence Examples
In most cases you need only scan one bar code to set a specific parameter. For
example, if you want to set the baud rate to 9600, simply scan the 9600 bar code
listed under Baud Rate. The base station will issue a warble tone, signifying a
successful parameter entry.
If you want to add or change prefixes and suffixes or customize the data
transmission format, you will have to scan several bar codes. This procedure is
described in Parameter Descriptions beginning on page 6-3.

Errors While Scanning

Don't worry if you make an error during a scanning sequence. Merely reenter
the correct parameter.