CAUTION! Do not operate a PTC-860NI with any
attached accessories in a hazardous location. Ac ce ssor ie s
are approved for use with the PTC-860NI only in
non-hazardous locations.
©Handling the PTC-860
The following information can help to ensure you receive
reliable, trouble-free service from your PTC-860.
•Do not open the PTC-860’s case. Only a trained technician
can service the parts inside the PTC’s case.
•If you store a PTC-860 containing a nickel-cadmium battery
pack in below-freezing temperatures for more than 1 hour,
do not charge the battery pack until it warms up to room
temperature.
•Make sure the PTC-860 is off before you connect or remove
any accessories or replace the batteries.
•Make sure all accessories connected by cable are connected
correctly and all accessories are locked into place.
•Do not connect or use any accessories with a PTC-860NI in
a hazardous location.
•Use only an AFAT nickel-cadmium battery pack in the
PTC-860NI.
•Use only Telxon-approved batteries and accessories. Do not
attempt to connect any electrical device that is not part of
your PTC-860 system to the PTC-860.
•Protect the PTC-860 from excessive heat, cold, an d
moisture and from harsh, dirty environments.
•Do not insert anything into the 25-pin connector.
•Do not remove any of the rubber or plastic plugs on the
PTC-860’s case, except to ad d a bar-code reader.
41