–15 –EN
0C28
DEGAUSSING
Magnetism from nearby appliances and speakers
might affect the color of the TVpicture.
If this happens, move this unit away from the appli-
ance. If the color is still not correct, disconnect power
cord from AC outlet then reconnect it after 30 minutes.
WATCHING A TV PROGRAM
1Turn on the TV/DVD
Press POWER to turn on the unit.
2Select the channel number
Press CHANNEL(CH.) K/Lto select your desired
channel number or press the number buttons.
Notes for using the numberbuttons on the remote
control:
•You must precede single-digit channel numbers
with a zero (Example: 02 ... 09).
•When selecting cable channels which are higher
than 99, press +100 first, then press the last two
digits. (Example: to select channel 125, first press
+100, then press 2 and 5).
Remember:
¡If the unit is connected to a cable box or satellite
box, it must be on CH3 or CH4, then the channel
to be viewed must be selected on the cable box or
satellite box.
3Adjust sound
Press VOLUME(VOL.) XX/YYto
adjust the volume.
NOTE:
•If you press CHANNEL(CH.) K/Lin the DVD
mode, you can change the TVchannels.
Even if you turn off the unit in the DVD mode,
when you turn it on again, it will go into the TV
mode.
TV
sB
BRIGHT to decrease to increase
brightness brightness
CONTRAST to decrease to increase
contrast contrast
COLOR to pale to brilliant
TINT to purple to green
SHARPNESS to soft to clear
PICTURE CONTROL
The unit’s picture controls – BRIGHT, CON-
TRAST, COLOR, TINTand SHARPNESS – are
preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a more natural looking image.
Make sure ...
•The unit is turned on.
1Select “PICTURE CONTROL”
Press PICTURE on the remote control.
2Select item you want to adjust
Press Arrow (K/L) until desired control is displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
3Adjust the picture control
Press Arrow (s/ B) to adjust to your desired level
within 5 seconds.
NOTE:
•At step [3], the picture adjustment display will dis-
appear from the TVscreen after about 5 seconds
unless you press any buttons, even though you may
not be finished. In this case, repeat from step [1].
TV
•If there is a powerfailure of any kind, the unit will
retain its memory forthis feature.
VOLUME 20
C C C C C C C C C C C C C C C C
BRIGHT
– PPPPPPPPPPPPPPCCPPPPPPPPPPPPPP +
TV OPERATION