DELETING (OR ADDING)
CHANNEL(S)
TV
The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)
1Select “CHANNEL SET UP”
Press SETUP on the remote control. Press Arrow (K/L) to point to “CHANNEL SET UP”.
Then press ENTER.
- TV SETUP -
BCHANNEL SET UP
2Select “ADD/DELETE CH”
Press Arrow (K/L) to point to “ADD/DELETE CH”.
Press ENTER.
– CHANNEL SET UP –
BADD / DELETE CH (CATV) AUTO CH PROGRAMMING
3Enter the desired channel number
Press Arrow (K/L) until your desired channel number appears. (You can also use the number but- tons or CHANNEL(CH.) K/L to enter it) (Example: CH8)
08
ADD / DELETE
•
•
You must precede
channel numbers with a zero (Example: 02 ... 09). When selecting cable channels which are higher than 99, press +100 first, then press the last two digits. (Example: to select channel 125, first press +100, then press 2 and 5).
4Delete (or add) it from (or into) memory
Press ENTER. The channel number changes to light red. The channel is deleted from memory.
•To delete another channel, repeat steps [3] and [4].
•If you press ENTER again, the channel is memo- rized again.
Added channel: Light blue.
Deleted channel: Light red.
5Exit the channel setup mode
Press SETUP to return to TV mode.
NOTE: To confirm that channel(s) has been deleted or added, press CHANNEL(CH.) K/L.
– 14 – | EN |
