SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter
Windows 19
Windows 98 Second Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-98xx family supporting
Windows 98 Second Edition (Windows 98 SE). This driver does not support Windows NT 4.0 or be-
low, Windows 2000, and Windows XP.
With PCI adapters, due to the plug & play facility of PCI, Windows 98 SE is able to find, identify, and
configure an adapter automatically.
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer, boot Windows 98SE (for details see
chapter 2 "Installation of the Network Adapter").
Windows 98 SE detects the SysKonnect SK-98xx V2.0 Gigabit Ethernet adapter as “PCI Eth er-
net Controller” during the boot operation.
The window “Add New Hardware Wizard” is displayed.
2. Click NEXT.
The menu “What do you want Windows to do?” is displayed.
3. Select the check box SEARCH FOR THE BEST DRIVER FOR YOUR DEVICE (RECOMMENDED).
4. Click NEXT.
5. Select the source (CD-ROM, floppy disk, hard disk) from which the driver is to be installed.
6. Type the path to the driver, e.g. e:\SK-982x\Windows\Win98SE, where ”e” is the designa-
tion of the CD-ROM drive on your system.
7. Click NEXT.
The window “Location of driver” is displayed.
8. Click NEXT.
The menu “Windows has finished installing the software that your new hardware device
requires” is displayed.
9. Click FINISH.
10. Restart your system.
For more information, refer to the corresponding readme file.
Windows Millennium Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-98xx family supporting
Windows Millennium Edition (Windows Me). This driver does not suppor t Windows NT 4.0 or below,
Windows 2000, and Windows XP.
With PCI adapters, due to the plug & play facility of PCI, Windows Me is able to find, identify, and
configure an adapter automatically.
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer, boot Windows Me (for details, see chap-
ter 2 "Installation of the Network Adapter").
Windows Me detects the SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter as “PCI Ethernet
Controller” during the boot operation.
2. Select the check box SPECIFY THE LOCATION OF THE DRIVER (ADVANCED).
3. Click NEXT.
4. Select the check box SEARCH FOR THE BEST DRIVER FOR YOUR DEVICE (RECOMMENDED).
5. Select the source from which the driver is to be installed, e.g. REMOVABLE MEDIA (Floppy, CD-
ROM).