20 4 Installation of the Driver Software
6. Select the check box SPECIFY A LOCATION.
7. Type the path to the driver, e.g. e:\SK-982x\Windows\WinME, where ”e” is the designation
of the CD-ROM drive on your system.
8. Click NEXT.
The menu “Windows has found multiple software packages that should work for this dev ice.
What would you like to install?” is displayed.
9. If Windows Me has detected the adapter you have installed in your computer, select the check
box THE UPDATED SOFTWARE (RECOMMENDED).
10. Click NEXT.
The window “Location of driver” is displayed.
11. Click NEXT to continue the installation.
The menu “Windows has finished installing the new hardware device” is di splayed.
12. Click FINISH.
13. Restart your computer.
For more information, refer to the corresponding readme file.
Windows 2000
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-98xx family supporting
Windows 2000. SysKonnect also offers the “Network Driver Installation Package for Windows 2000
and Windows XP”. For details on this package, refer to section "SysKonnect Network Driver Installa-
tion Package for Win-dows 2000 and Windows XP".
Install the driver To install the driver, proceed as follows:
1. After you have installed the adapter in your computer, boot Windows 2000 (for details, see
chapter 2 "Installation of the Network Adapter").
Windows 2000 detects the SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter as “Ethernet
Controller” during the boot operation.
The window „Found New Hardware Wizard“ is displayed.
2. Click NEXT.
In the same window, the menu „Install Hardware Device Drivers“ is displayed.
3. Select the check box SEARCH FOR A SUITABLE DRIVER FOR MY DEVICE (RECOMMENDED).
4. Click NEXT.
The menu “Locate Driver Files” is displayed.
5. Select the source from which the driver is to be installed (Floppy disk drives, CD- ROM drives, or
Specify a location).
6. Click NEXT.
The menu “Driver Files Search Results” is displayed, listing th e found driver and its location.
7. To install the driver, click NEXT.
In case the driver does not have a Microsoft Digital Signature yet, the window “Digital Signature
Not Found” is displayed.
8. To continue the installation, click YES.
The window ”Completing the Found New Hardware Wizard” is displayed.
9. Click FINISH to complete the installation.
Update the driver To update the driver, proceed as follows:
1. On the desktop, right-click the MY COMPUTER icon.
2. Select MANAGE.
The window “Computer Management“ is displayed.
3. Select DEVICE MANAGER from the list on the left side of the window.