SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter
Additional Functions of the Diagnostics Program 49
Additional Functions of the Diagnostics Program

Checking Other Displays and Data

In addition to performing the three network adapter tests, the diagnostics program can also read out
network adapter-specific data that may be useful for pinpointing the causes of f ailure.
You can
• read sensor data,
• read configuration data,
• read and write VPD data,
• read and write Flash EPROM data.

Main Program

To start the main program, proceed as follows:
1. Boot to DOS.
Wait for the prompt.
2. Insert the installation CD-ROM into the CD-ROM drive of the computer in which the networ k
adapter is installed.
3. Type the letter of your CD-ROM drive (e.g. D:)
4. Go to the appropriate product directory.
5. Type sk98diag.
6. Press <Enter>.
The main menu will be displayed:
Figure 8. Diagnostics program, main menu
7. Select the appropriate item from the menu (see figure 8).
8. To quit the program, select EXIT in the main menu.
This option is automatically offered for selection if you did not sele ct a menu item previously.