SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter
Windows 21
4. On the right side of this window, select NETWORK ADAPTERS.
5. Right-click the adapter which is to be updated.
6. Select PROPERTIES.
7. Select the tab DRIVER.
8. Click UPDATE DRIVER....
The window “Upgrade Device Driver Wizard“ is displayed.
9. Click NEXT.
In the same window, the menu “Install Hardware Device Drivers” is displayed.
10. Select the c heck box DISPLAY A LIST OF THE KNOWN DRIVERS FOR THIS DEVICE SO THAT I CAN
CHOOSE A SPECIFIC DRIVER.
11. Click NEXT.
The menu “Hardware Type“ is displayed.
12. Select NETWORK ADAPTER.
13. Click NEXT.
The menu “Select Network Adapter“ is displayed.
14. Select the adapter for which the driver is to be installed.
15. Click HAVE DISK...
The window “Install from Disk“ is displayed.
16. Type the path to the driver.
17. Click OK.
The menu “Select Network Adapter“ is displayed again.
18. Select the adapter for which the driver is to be installed.
19. Click NEXT.
The menu “Start Device Driver Installation“ is displayed.
20. To install the driver, click NEXT.
In case the driver does not have a Microsoft Digital Signature yet, the window “Digital Signature
Not Found” is displayed.
21. To continue the installation, click YES.
The window “Upgrade Device Driver Wizard“ is displayed.
The menu ”Completing the Upgrade Device Driver Wizard” is displaye d.
22. Click FINISH to complete the installation.
For more information, refer to the corresponding readme files.
i
If the driver for one SysKonnect SK-98xx adapter is updated, all SysKonnect SK-98xx adapters
installed in your system should be updated.