SysKonnect SK-9E21D 10/100/1000Base-T Adapter PCI Express
Windows 21
Windows 98 Second Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-9E21D 10/100/
1000Base-T Adapter, PCI Express, supporting Windows98 Second Edition
(Windows 98 SE). This driver only supports Windows98 SE and Windows Me.
With PCI Express adapters, due to the plug & play facility of PCI, Windows 98 SE is able to
find, identify, and configure an adapter automatically.
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer (for details see chapter 1 "Installa-
tion of the Network Adapter"), boot Windows 98 SE.
Windows 98 SE detects the SysKonnect SK-9E21D Adapter as “PCI Ethernet Controller”
during the boot operation.
The window “Add New Hardware Wizard” is displayed.
2. Click NEXT.
The menu “What do you want Windows to do?” is displayed.
3. Select the check box SEARCH FOR THE BEST DRIVER FOR YOUR DEVICE (RECOMMENDED).
4. Click NEXT.
5. Select the source from which the driver is to be installed (e.g. CD-ROM, floppy disk, hard
disk).
6. Select the checkbox SPECIFY A LOCATION.
7. Type the path to the driver, e.g. e:\SK-9E21D\Windows\Win98SE, where ”e” is the
designation of the CD-ROM drive on your system.
8. Click NEXT.
The window “Location of driver” is displayed.
9. Click NEXT.
The menu “Windows has finished installing the software that your new hardware device
requires” is displayed.
10. Click FINISH.
11. Restart your system.
For more information, refer to the corresponding readme file.
Windows Millennium Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-9E21D 10/100/
1000Base-T Adapter, PCI Express, supporting Windows Millennium Edition (Windows Me).
This driver only supports WindowsMe and Windows 98 SE.
With PCI Express adapters, due to the plug & play facility of PCI, Windows Me is able to find,
identify, and configure an adapter automatically.
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer (for details, see chapter 1 "Installa-
tion of the Network Adapter"), boot Windows Me.
Windows Me detects the SysKonnect SK-9E21D Adapter as “PCI Ethernet Controller”
during the boot operation.
2. Select the check box SPECIFY THE LOCATION OF THE DRIVER (ADVANCED).
3. Click NEXT.
4. Select the check box SEARCH FOR THE BEST DRIVER FOR YOUR DEVICE (RECOMMENDED).
5. Select the source from which the driver is to be installed (e.g. CD-ROM, floppy disk, hard
disk).
6. Select the check box SPECIFY A LOCATION.