18 3 Installation of the Driver Software
Windows
SysKonnect offers drivers for Windows Server2003, Windows XP, Windows2000, Windows Me,
Windows 98 SE, and Windows NT 4.0.
Drivers downloaded from our web site are available in a packed format (.zip files). The downloaded
file has to be unpacked before installation.

Windows NT 4.0

The NDIS 4.0 32-bit Miniport driver for the SysKonnect SK-9Exx/9Sxx Gigabit Ethernet Server
Adapter Family supports WindowsNT 4.0. This driver does not support Windows NT 3.51 or below.
It is recommended to install the latest WindowsNT 4.0 Service Pack after successful installation of
the driver.
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer (for details, see chapter 1 “Installation of
the Network Adapter”), boot WindowsNT 4.0.
2. Select START > SETTINGS > CONTROL PANEL.
The window “Control Panel” is displayed.
3. Select NETWORK.
The window “Network” is displayed.
4. Select the tab ADAPTERS.
5. Click ADD....
6. Click HAVE DISK....
7. Depending on the type of installation medium used (CD-ROM, floppy disk, network drive), type
the path to the driver, e.g. e:\SK-9Exx\Windows\Nt4, where “e” is the designation of the
CD-ROM drive on your system.
8. Click OK.
The window “Select Network Adapter” is displayed.
9. Select the adapter for which the driver is to be installed.
10. Click OK.
The window “Card Setup” is displayed.
11. Configure the adapter (for details, refer to the corresponding readme file).
12. When you have finished the configuration, click OK.
13. After successful installation of the driver, install the latest WindowsNT 4.0 Service Pack.
14. Restart your system.
For more information, refer to the corresponding readme file.