SysKonnect SK-9Exx/9Sxx Gigabit Ethernet Server Adapters
Technical Specifications 45
Technical Specifications
Network interface
standard
IEEE 802.3 and IEEE 802.3u (Ethernet and Fast Ethernet)
IEEE 802.3ab and IEEE 802.3z (Gigabit Ethernet)
IEEE 802.3x (Flow-control and Auto-negotiation)
IEEE 802.1p (Quality of Services)
IEEE 802.1q and IEEE 802.3ac (VLAN and VLAN tagging)
Supported buses PCI/PCI-X: 64-bit PCI/PCI-X slots with clock speeds from 33MHz
to 133 MHz
PCI Express: PCI Express 1.0a
Bus width PCI/PCI-X: 64 bit, supports 32/64-bit operation in PCI slot
PCI Express: x1 and x4 PCI Express serial link, can also be operated
in x8, x16 slots
RAM On-chip buffer: 96 KB RAM per port
SPI Flash Memory 256 KB
TWSI EEPROM Maximum size: 2 KB
256 bytes can be used for VPD (read-only and writable section)
Power management Advanced Power Management according to PCI Bus Power Manage-
ment Interface Specification, Revision 1.1 or later and Network Device
Class Power Management Reference Specification V2.0
Hot-Plug PCI/PCI-X: Hot-Plug Support according to PCI Hot-Plug Specifica-
tion, Revision 1.1
PCI Express: Hot-Plug Support according to PCIExpress 1.0a and
Advanced Configuration and Power Interface Specifica-
tion, Revision 2.0
Safety standards Europe: EN60950 – IEC 60950 – VDE 0805
USA / Canada: cULus listed accessory (UL 60950, CSA C22.2)
International: CB certification
Approved use The SysKonnect SK-9Exx/9Sxx Gigabit Ethernet Server Adapter Fam-
ily is for use in a compatible Listed Personal Computer that has Instal-
lation Instructions detailing user installation of card cage accessories.
EMC standards Europe: EN55022; IEC – CISPR-22 Class B
EN 55024; IEC – CISPR-24
USA: FCC, CFR 47 Part 15, Declaration of Conformity Class B
Power consumption Single link: @ +3.3V / VCC: max. 0.9 A / 3 W
@ +3.3V(aux): max. 375 mA
Dual link: @ +3.3V / VCC: max. 1.8 A / 6 W
@ +3.3V(aux): max. 375 mA