SysKonnect SK-9Exx/9Sxx Gigabit Ethernet Server Adapters
Windows 19
Windows 98 Second Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-9Exx/9Sxx Gigabit
Ethernet Server Adapter Family supporting Windows98 SecondEdition (Windows 98SE). This
driver only supports Windows 98 SE and Windows Me. Due to the plug & play facility of
PCI Express resp. PCI/PCI-X, Windows98 SE is able to find, identify, and configure an adapter au-
tomatically.
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer (for details, see chapter 1 “Installation of
the Network Adapter”), boot Windows98 SE.
Windows 98SE detects the SysKonnect SK-9Exx/9Sxx Adapter as “PCI Ethernet Controller”
during the boot operation.
The window “Add New Hardware Wizard” is displayed.
2. Click NEXT.
The menu “What do you want Windows to do?” is displayed.
3. Select the check box SEARCH FOR THE BEST DRIVER FOR YOUR DEVICE (RECOMMENDED).
4. Click NEXT.
5. Select the source from which the driver is to be installed (e.g. CD-ROM, floppy disk, hard disk).
6. Select the checkbox SPECIFY A LOCATION.
7. Type the path to the driver, e.g. e:\SK-9Exx\Windows\Win98SE, where “e” is the designa-
tion of the CD-ROM drive on your system.
8. Click NEXT.
The window “Location of driver” is displayed.
9. Click NEXT.
The menu “Windows has finished installing the software that your new hardware device
requires” is displayed.
10. Click FINISH.
11. Restart your system.
For more information, refer to the corresponding readme file.
Windows Millennium Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-9Exx/9Sxx Gigabit
Ethernet Server Adapter Family supporting Windows Millennium Edition (Windows Me). This driver
only supports Windows Me and Windows 98 SE. Due to the plug & play facility of PCI Express resp.
PCI/PCI-X, Windows Me is able to find, identify, and configure an adapter automatically.
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer (for details, see chapter 1 “Installation of
the Network Adapter”), boot WindowsMe.
Windows Me detects the SysKonnect SK-9Exx/9Sxx Adapter as “PCI Ethernet Controller” dur-
ing the boot operation.
2. Select the check box SPECIFY THE LOCATION OF THE DRIVER (ADVANCED).
3. Click NEXT.
4. Select the check box SEARCH FOR THE BEST DRIVER FOR YOUR DEVICE (RECOMMENDED).
5. Select the source from which the driver is to be installed (e.g. CD-ROM, floppy disk, hard disk).
6. Select the check box SPECIFY A LOCATION.