T-Mobile TM1758 manual Change Ssid and Wi-Fi password, Install Mobile Hotspot Admin shortcut

6.Enter the default password.

7.Click OK. Your Mobile Hotspot’s Internet connection is now available to your connected computer.

Change SSID and Wi-Fi password

To connect Wi-Fi enabled devices, you can use the default SSID and password printed on the label in your Mobile Hotspot’s battery compartment, or set your own.

1.Connect your computer to your Mobile Hotspot via Wi-Fi.

2.On your computer, open a browser window and enter http://mobile. hotspot/ in the Web address field.

3.In the Password field, enter your password and click Login.

NOTE: The default password is “admin”.

4.At the Change SSID and Password screen, enter a new SSID name and password.

5.Click Apply and then click Apply again.

6.Click OK.

NOTE: It is recommended that you also change the password you use to access the T-Mobile Hotspot Admin page. To change your administrative password, see page 15.

7.Turn to the front page of this guide and record your new SSID, Wi-Fi password, and administrator password for safekeeping. You will need this information to connect other devices to your Mobile Hotspot’s network and to access your T-Mobile Hotspot Admin page.

Install Mobile Hotspot Admin shortcut

If you would like to install a desktop shortcut to your T-Mobile Hotspot Admin page, follow these steps:

Install on a computer

1.Charge and power on your Mobile Hotspot.

2.Plug the small end of the USB cable into the bottom of the Mobile Hotspot and the large end into a USB port on your Wi-Fi enabled computer.

11 12