T-Tech ES8000, ES6000 user manual Safety Summary

Congratulations! You have just purchased the finest quality portable power source and jump starter on the market. We have taken numerous measures in quality control and in our manufacturing processes to ensure that your product arrives in top condition, and that it will perform to your satisfaction.

In the rare event that your Truck PAC contains a damaged or missing item, does not perform as specified, or requires warranty service, please call Technical Service at

(913)310-1050.Save your purchase receipt, it is required for warranty service.

This unit has a sealed lead-acid battery that should be kept at full charge. Recharge when first received, immediately after each use, and every three months if not used. Failure to perform maintenance charges may cause the battery life to be reduced greatly.

SAFETY SUMMARY

WARNING

Read these instructions completely before using the Truck PAC and save them for future reference. Before using the Truck PAC to jump start a car, truck, boat or to power any equipment, read these instructions and the instruction manual/safety information provided by the car, truck, boat or equipment manufacturer. Following all manufacturers’ instructions and safety procedures will reduce the risk of accident.

Working around lead-acid batteries may be dangerous. Lead-acid batteries release explosive gases during normal operation, charging and jump starting. Carefully read and follow these instructions for safe use. Always follow the specific instructions in this manual and on the Truck PAC each time you jump start using the Truck PAC.

All lead-acid batteries (car, truck and boat) produce hydrogen gas which may violently explode in the presence of fire or sparks. Do not smoke, use matches or a cigarette lighter while near batteries. Do not handle the battery while wearing vinyl clothing because static electricity sparks are generated when vinyl clothing is rubbed. Review all cautionary material on the Truck PAC and in the engine compartment.

Always wear eye protection, appropriate protective clothing and other safety equipment when working near lead-acid batteries. Do not touch eyes while working on or around lead-acid batteries.

Always store clamps in their holsters, away from each other or common conductors. Improper storage of clamps may cause the clamps to come in contact with each other, or a common conductor, causing the battery to short circuit and generate high enough heat to ignite most materials.

Use extreme care while working within the engine compartment, because moving parts may cause severe injury. Read and follow all safety instructions published in the vehicle's Owner's Manual.

While the battery in the Truck PAC is a sealed unit with no free liquid acid, batteries being jump started with the Truck PAC unit likely contain liquid acids which are hazardous if spilled.