Introduction This Operator’s Manual is intended as a quick introduction into working with the printer and is
to enable also unexperienced users to handle the device properly. It describes the most important
functions of the printer and contains the essential information for your everyday work with the
printer. A more detailed description of the printer, its characteristic features and further informa-
tion is contained in the Reference Manual on the Online CD-ROM which is included at the back
of this manual.
➤Symbols used Important information is highlighted in this manual by two symbols.
CAUTION marks information which must be observed in order to prevent injuries to the user
and damage to the printer.
NOTE marks general or additional information about a specific topic.
➤Important safety
instructions Read the following instructions thoroughly before starting up your printer in order to prevent
injuries and avoid damage to the device.
Keep this Operator’s Manual in a place which is easily accessible at all times.
Place the printer on a solid base so that it cannot fall down to the ground.
Do not expose the printer to high temperatures or direct sunlight.
Keep all liquids away from the printer.
Protect the printer from shock, impact and vibration.
Make sure to connect the printer to a socket with the correct mains voltage.
The power supply cable may be damaged if the paper edges constantly chafe the insulating
sheath. The user must always ensure that there is sufficient distance between the power sup-
ply cable and the paper.
Never carry out maintenance or repair work yourself. Rather, contact a qualified service
technician in each case.
Whenever you want to disconnect the printer from the power supply, pull out the plug from the
mains socket.
Additional safety instructions are provided at the relevant places in the text.
Ah ha!
!STOP
STOP
STOP
Introduction Quick Start-up
2