Quick | Installation |
H
➤Checking the printer voltage
STOP
Make sure that the device has been set to the correct voltage (e.g. 230 V in Europe, 120 V in the USA). To do this, check the type plate above the power inlet at the back of the printer.
Never switch on the printer if the voltage setting is incorrect, since this may result in severe damage.
You can set the printer to the correct mains voltage yourself. To do this, cautiously place the printer on its back side.
LISGNE
FrontVorderseiteside of printerdes Druckers |
120 V |
230 V |
BackRückseiteside of printerdes Druckers |
Use a suitable object (e.g. a screwdriver, but never a pencil) to set the slide switch on the left at the bottom of the printer to the correct voltage.
7
