11 Select the check box to the left of the original recording that is now being played back and then click
Disconnect selected to stop the recording
12 Go to Recordings
You now see your recordings.
13 Delete the copy that you just made by selecting its check box and then clicking Delete selected
Managing endpoints You can pre-configure endpoints on the IP VCR in the same way as you can on the MCU.
1 Go to Endpoints and click Add H.323
2 Complete the fields using the online help if necessary and then click Add endpoint
Call-out parameters are the values that are used when calling out to an endpoint from the IP VCR. The
Conferencing parameters define the preferred settings for the endpoint.
Similarly Call-in match parameters are details used by the IP VCR when an endpoint that calls in. The IP
VCR tries to match an incoming call to identify the endpoint. Therefore at least one of the Call-in match
parameters fields must be completed and you can complete 1, 2 or 3 of the fields. All the details provided
must match in order to apply the settings to that caller. However, blank fields are ignored.
The advantage of the IP VCR being able to match an incoming call to a pre-defined endpoint is that the
parameters (for instance, the bandwidths) will automatically take effect rather than needing to be set up
each time that endpoint calls in.
Note in the same way SIP end points can be added with the ‘Add SIP’ button in the endpoints screen.
40