b. To assign a static IP address, enter the information using the following format and then press Enter:
static <IP> <netmask> <default gateway> <DNS server>
If you do not have a DNS server, use 0.0.0.0 in place of the DNS server address – you must enter a
DNS server address. For example, to assign an address of 192.168.1.2 where the default gateway is at
192.168.1.1, enter:
static 192.168.1.2 255.255.255.0 192.168.1.1 0.0.0.0
3 To display the current IP address, enter status at the VCR prompt and then make a note of the IP address
as you will need it during the tutorial
f To see all commands available from the console interface, type help and press Enter
f To see the syntax for each of the commands, type them in and press Enter
Log in to the web interface You can now log in and control the IP VCR via the web interface. The web interface is used to administer the
IP VCR device and manage recordings, users, and associated devices.
1 Using a web browser, type in the host name or IP address of the IP VCR that you displayed in the
previous section
You now automatically have the rights of the ‘guest’ user.
2 Click on the Click here to log in link
3