![OPERATION AND FUNCTIONS](/images/new-backgrounds/16999/1699929x1.webp)
OPERATION AND FUNCTIONS
On, Off and standby
1Turn on the unit by pressing the mains switch.
2Press the standby button on the remote control to switch to standby mode. The display will turn off and all functions will be reduced to a minimum to make sure that the unit uses minimal power. When in standby mode the unit only reacts to the standby button of the remote control.
3If you wish to turn off the unit to avoid any power consumption, you must
press the mains switch.
+ 2
1
3
POWER
PH
Protect the environment and turn off the unit after use.
Info and function
1As this tuner can receive both normal FM radio and DAB (Digital Audio Broadcasting), it features
a function that can switch between the two |
| CONTROL/TUNING |
reception types. To switch between DAB and FM, |
|
|
you must either press the DAB/FM button on the | 1234 DAB/FM AUTOTUNE | INFO |
front panel or the FUNCTION button on the |
| PRESS TO SELECT |
remote control. |
|
|
2 | 1 | 2 |
This tuner features RDS on the FM receiver. DAB also offers some information possibilities that resemble RDS as we know it from FM. To activate this information from both DAB and FM, you must press the INFO button either on the front panel or on the remote control. The display will show information about for instance time and date, name of station, name of artist, title, etc.
+
Note:
If the INFO button is pressed after channels have been saved, the strength of the antenna signal will also be displayed.
2
1
14