OPERATION AND FUNCTIONS
FM tuning
The
This makes it possible to save just one specific channel. It also makes it possible to adjust the supplied antenna for the best possible signal.
Automatic tuning |
|
| CONTROL/TUNING |
1 To use the autotune function through the front |
|
|
|
panel controls, you must press the | 1 | 23 | 4 DAB/FM AUTOTUNE INFO |
AUTOTUNE button. The unit will search for a | 1 |
| PRESS TO SELECT |
|
|
frequency with a proper signal.
2You can also activate the autotune function
through the remote control.
+
2
The display will now use a higher frequency. At the top of the display you can see that the frequency increases. When the tuner has found a channel, the tuning process will automatically stop. The sound from the channel found will be heard and any RDS information will be displayed.
If no channels are found, you must check if the antenna has been correctly connected. You can do this by tuning in on a channel through manual tuning on the FM band, and then press the INFO button to display the signal bar and check the signal strength (see the section on manual FM
tuning). | 1 | 2 | 3 | 4 | DAB/FM AUTOTUNE INFO |
|
|
|
|
|
Manual tuning
1To activate the manual tuning function
through the front panel controls, simply turn |
|
| CONTROL/TUNING | ||
|
|
|
|
| |
the CONTROL/TUNING button. If you turn it |
|
|
|
| 1 |
|
|
| |||
clockwise, the unit will tune in to a station at | 1 | 23 | 4 DAB/FM AUTOTUNE INFO |
a higher frequency and if you turn the button | PRESS TO SELECT |
| |
|
|
|
|
|
|
|
|
|
| ||
|
| ||
|
|
2station at a lower frequency. It is also
possible to activate the manual tuning |
|
|
|
|
function through the remote control. Use the |
|
| + | |
SCROLL + and SCROLL - buttons that |
|
| ||
| ||||
works in the same manner as the | 2 |
| ||
CONTROL/TUNING button on the front |
|
|
|
|
|
|
|
| |
panel. |
|
|
|
|
Note:
If there are channels from the FM band that have not been saved, you must tune in to them again either manually or automatically if you wish to listen to them again.
16