Tanita TBF-560 Body Fat Monitor/Scale

1

2

Press buttons simultaneously and release instantly.

Accessories

1.Support feet (4)

For use on carpeting 0.8 inches thick or less; a hard, uncarpeted surface is recommended.

2.AA-size batteries (4)

These are trial batteries. Their service life will be short. New batteries will last for about a year when this unit is used by five persons once every day.

Useful features of the TBF-560

The TBF-560 allows you to measure both weight and body fat percentage simultaneously as easily and simply as stepping on a scale.

The TBF-560 can be set for a Male/Female/Adult Athlete, increasing the accuracy of the measurements.

Personal data (birth date, gender, height) can be preset and stored in memory for up to five persons. Personal data can be reprogrammed to allow for changes such as a child growing.

Body weight and body fat percentage measurements for five persons can be recorded in the memory of the unit. User’s current measurements can be compared with past readings record for up to 2 years.

The TBF-560 can also provide body weight and body fat percentage for an unlimited number of guests that do not require their data to be recorded in the memory of the unit.

The TBF-560 alerts you with a “No” (triggered by a significant weight change) to indicate the possibility that you have mistakenly used someone else’s PERSONAL key.

Switching the weight mode

The TBF-560 can record measurements in lb (pounds), kg (kilograms), or st-lb (British stone pounds). To select the preferred unit, make sure the monitor is off. Press the Green Up and Orange Set buttons simultaneously and release instantly. Press the Up/Down buttons to choose the measurement unit (lb/kg/st-lb) you desire, then press the Orange Set button. The display screen will flash and you will hear two beeps to confirm your selection and store it in memory. (To change weight unit, repeat the previous steps.)

Automatic shut-down function

The automatic shut-down function shuts off the power automatically in the following cases:

•If you interrupt the measurement process.

The power will shut down automatically within 10 to 20 seconds, depending upon the type of operation.

•If an extraordinary weight is applied to the platform.

•If you make a mistake during measurement or a key operation.

•After you have completed the measurement process.

NOTE: If the power shuts off automatically due to a problem, repeat the steps from the beginning (see pp. 9-10 for steps).

6