Tannoy I9 user manual 11.2i9Y - Wall mount Bracket, Fig Fig

11.2i9Y - Wall mount Bracket

Ë(2)

Only the screws, fasteners, and washers specified on figure 1. Should be used to assemble the i9Y bracket

Å(1)

Fig 2.

Fig 1.

The Main body of the bracket (1) should be fixed first to the wall in the desired location using all six fixing points. Secure fixings to the building structure are vital; ensure the structure will accept the combined load of the speaker and bracket. The top portion of the bracket (2) is fixed to the main body using the bolt provided in one of the four fixing points shown, according to the desired angle. Fine-tuning of this angle is achieved by sliding the top part of the bracket in the slot shown in fig1.

The loudspeaker can then be attached to the bracket as shown using the fixing hardware provided. If no downward angle is desired, the i9Y bracket can be assembled as shown in fig2. before attaching the loudspeaker to the bracket.

Fig 3. shows the assembled bracket & speaker.

Í Î

Ï

Ð

Fig 4.

Fig 5.

Fig 3. The i9’s proximity to the wall can be adjusted to allow aiming of the loudspeaker in the horizontal plane (fig 4 & 5).

12