Tannoy SUBWOOFERS manual Technical Specifications Active Module

26

TECHNICAL SPECIFICATIONS ACTIVE MODULE

Frequency Response:	-3 dB 31 Hz -150 Hz (-10 dB @ 21 Hz)
Power Rating:	110 Watts rms
Maximum SPL (2) @ 1 meter:	110 dB (Peak)
Driver Complement:	1 x 10” (254 mm)
LF Cutoff (-3 dB):	31 Hz, 6th order tuning, vented box
Inputs:	2 x XLR balanced
Outputs:	2 x XLR balanced
Protection Limiter:	Threshold at onset of clipping
Input Level:	Continuously variable input gain control
Low Pass Filter:	Continuously variable 40 Hz - 150 Hz, 24 dB/Octave
All Pass:	31 Hz - 300 Hz +3 dB
High Pass Filter:	Fixed at 80 Hz, 12 dB / Octave
High Pass output:	L/R, unity gain XLR balanced
High Pass output Bandwidth:	80 Hz - 150 kHz -3 dB
Amplifier type:	Mosfet outputs
AC Power Requirement:	110/120 VAC 50/60 Hz or 220/240 VAC 50/60 Hz
Power Consumption:	16 Watts at idle
	150 Watts at rated power
Power Indicator:	Front mounted green LED in active mode, " when signal is present or on initial
	power up" . Green LED turns to red if signal is not present for more than two
	minutes indicating stand-by mode. The sub turns " auto on" when signal is
	re-introduced.