Targus AMW15EU specifications Charging the Batteries

Targus Wireless Laser Rechargeable Notebook Mouse

3Insert the supplied batteries, making sure that the positive (+) and negative (-) ends of each battery match the polarity indicators inside the battery housing.

WARNING: WHEN REPLACING THE BATTERIES, USE ONLY HEAVY-DUTY NIMH RECHARGEABLE BATTERIES. NEVER USE ALKALINE BATTERIES.

AVOID MIXING NEW AND USED BATTERIES IN A DEVICE.

4 Slide the battery cover back into position until it “clicks” firmly into place.

5Turn on the mouse by sliding the on/off switch on the bottom of the mouse to the “on” position.

NOTE: WHILE THE MOUSE IS FUNCTIONING, NO LASER LIGHT IS VISIBLE TO THE NAKED EYE. BE CAREFUL NOT TO LOOK DIRECTLY INTO THE EMITTER HOLE WHILE THE MOUSE IS ACTIVE.

Charging the Batteries

For best results, you should charge the mouse at least 4 hours before using it. You can do this via the supplied USB charge cable. To do this:

1Connect the cable’s USB connector into an available USB port on your computer.

2Connect the other end to the mouse.

NOTE: TO CONTINUOUSLY CHARGE THE MOUSE VIA THE USB CHARGE CABLE, YOUR COMPUTER MUST BE ON AND AWAKE. FOR BEST RESULTS, TURN OFF YOUR COMPUTER’S POWER MANAGEMENT FEATURE WHILE CHARGING THE MOUSE.

7