Targus USB Mobile Port Replicator Introduction, Connecting The Usb Port Replicator, Contents

INTRODUCTION

Congratulations on your purchase of the Targus USB Mobile Port Replicator with Ethernet! It is an intelligent expansion module that easily connects to a PC or notebook via a USB port.

This user’s guide describes the port replicator’s features, and gives instructions for connecting various devices and installing the software.

System Requirements

vUSB V.1.1 compliant port

vOperating system: Windows 98 or Windows 2000

Contents

In addition to this user’s guide, the package contains:

vTargus USB Mobile Port Replicator with Ethernet

v3-foot USB cable (A/B type, attached)

vAC power adapter

vTargus driver diskette

CONNECTING THE USB PORT REPLICATOR

The USB Mobile Port Replicator with Ethernet provides two USB ports, two PS/2 ports, one RS232 serial port, one parallel port, and one RJ-45 Ethernet port. This port replicator provides easy connectivity for network, serial, PS/2, and other USB devices.

To get started, plug one end of the AC power adapter into the port replicator and the other end into a wall outlet. Do not connect any devices at this time. Once the port replicator is connected and the software installation is complete, you can connect your devices and install any supporting software drivers.

Note: Your computer may be turned on or off when you connect the port replicator.

Before you begin, make sure you can identify the ports on the port replicator (Figures 1 and 2).

1