After rebooting, any device driver that requires installation is automatically detected and the Add New Hardware Wizard window appears to complete the installation process.
Installing the Serial Port Driver
The New Hardware Detected message box appears, when your computer finds the PA090 Serial Converter.
Then the Add New Hardware Wizard window appears.
1Click Next .
2When the message, What would you like Windows to do? appears, select Search for the best driver for your device, and click Next.
3Insert the Targus driver diskette and select Floppy disk drives.
4Click Next .
The system locates the correct software driver.
5Click Next to install the driver.
6When the installation complete message appears, click Finish.
Installing the Parallel Port Driver
The Found New Hardware Please wait... message box appears when your computer finds the PA090 Parallel Interface Controller.
1Insert the Targus driver diskette (if not already inserted) and select Floppy disk drives.
2Click Next to search for the software driver.
3When the driver is found, click Next.
4When the installation complete message appears, click Finish.
NOTE: Before connecting a printer to the port replicator, install the printer’s software driver to avoid printing unknown formats or characters.
5
