7 – Cassette1– Introducoperatingon
Other tape functions and features
Tape counter
The tape counter value increments when the tape is moving from left to right, and decrements when it moves from right to left.
Use either of the RESET keys (main or remote) to reset the value to 0000.
When the counter has been set to 0000, this position can be reached easily by pressing either of the RTZ keys (main or remote). The tape fast forwards or fast rewinds to the 0000 mark.
NOTE
If the current tape position is too close to the 0000 mark (greater than 9995 or less than 0004), this function is not available.
Pitch control
The tape speed can be controlled using the PITCH CONTROL.
Turning this to the right of the center position results in faster tape speed (higher pitch), and turning to the left of the center position results in slower tape speed (lower pitch). The maximum is 10% away from normal.
The center “neutral” position is marked by a click detent.
OUT2 setting (TAPE or AUTO)
Using the OUT2 menu, you can assign the LINE OUTPUTS2 to TAPE or AUTO (the default setting is TAPE).
If TAPE is selected, the unit outputs only the cassette tape when playing back or monitoring.
If AUTO is selected, the unit outputs either the cassette tape or disc automatically when playing back or monitor- ing. However, note that if both are playing at same time, the cassette takes priority (the disc will not be heard through these outputs).
1.Press the MENU key until the menu item OUT2>XXX shows up on the display.
2.Turn the MULTI DIAL to select TAPEor AUTO.
3.Push the MULTI DIAL to confirm and exit the menu operation.
TASCAM