81 – ReferenceIntrodu8 tion–Referenceandspe ificationsand specifications

Error messages

Message

Details / Response

Cannot Rec!

Use unfinalized recordable disc.

Disc Error!

The unit may ejects the loaded disc. If it is CD-RW disc, you may refresh it

 

(“Refreshing a disc” on page 29), or replace disc.

Disc Full !!

There is no space on disc, or no tracks are available.

Drive Error!

There is problem with the Drive mechanism.

D-IN UNLOCK!

Digital input is not connected. Turn on power of source unit and

 

connect to DIGITAL IN.

Cannot ERASE!

The data cannot be erased.

Erase Error!

An error has occurred while trying to erase disc.

Not Fs 44.1k!

The sampling frequency of digital input is not 44.1kHz.

 

Please turn SRC on (“Frequency conversion” on page 21).

PGM Full !

An attempt has been made to create more than 99 tracks.

Rec Error

A general recording error. Try recording again with different disc.

 

The unit may ejects the loaded disc.

System Err!

System Error. Try turning the power off and on again.

Eject Error!

There is a problem with the disc slot.

Messages displayed during normal operation

Message

Statement

Complete

An operation such as finalize or erase has been successfully completed.

Now OPC

Calibration is being performed to operate recording properly.

Now REPAIR

The disc is being repaired and this operation will take a long time.

 

Please do not turn off power of the unit until it finishes.

PMA Writing

Recorded content is being written to disc.

TOC Reading

Table of contents data is being read.

REC Standby

The unit is in recording standby mode.

Blank Disc

A blank recordable disc has been inserted.

NO DISC

A disc is not loaded into the unit.

34 TASCAM CC-222SLMKII