1 – Introduction
Rack-mounting the unit
If you are mounting the unit in a rack, leave 1U of space above it and 4 inch (10cm) or more of space at the rear.
Use the
Some notes, precautions and environmental considerations
The
•• Avoid exposing it to extremes of temperature and humidity and avoid mechanical shocks and vibration.
•• Keep the unit away from strong magnetic fields (TV sets, computer monitors, large electric motors, etc.).
•• The nominal temperature should be between 5°C and 35°C (41°F and 95°F).
•• Relative humidit y should be 30 to 90 deg rees
•• As the unit may become hot during operation, always leave sufficient space above the unit for ventilation. Do not install this unit in a confined space such as a book case or similar product, and do not put any material
goods on the unit.
•• Avoid installing this unit on top of any
•• Make sure that the unit is mounted in a level position for correct operation.
•• The voltage selector on the rear panel is only available on units for the North American market. Please set this to match your local supply. If you are in any doubt in this matter, consult an electrician.
NOTE
When transporting the unit, always use the original packing materials. For this reason, we strongly recommend that you save all the packing materials that came with the
Beware of condensation
If the unit (or a compact disc) is moved from a cold to a warm place, or used after a sudden temperature change, there is a danger of condensation; vapor in the air could condense on the internal mechanism, making correct operation impossible. To prevent this, or if this occurs, let the player sit for one or two hours at the new room temperature before using.
Never use a stabilizer or printable discs
Using commercially available CD stabilizers or printable recordable discs with this player will damage the mechanism and cause it to malfunction.
NOTE
Never use a disc that has had a stabilizer mounted to it. The residual adhesive may cause the disc to stick to the turntable of the
TASCAM