4 − Playing back CDs

Replacing a program track

You can replace a track that has already been added to the program.

1Press the PROGRAM EDIT key on the remote control to put the unit into program mode.

2Follow the steps in “Checking the program” above and press the PROGRAM EDIT key to show the pro- gram step with the track that you want to replace.

3Use the numeric keys or skip (Ô/Â, ¯/) keys to select the desired track and press the

PROGRAM EDIT key.

After replacing a track, the display shows the empty step at the end of the program and you can add another track to the end of the program if desired.

4.Press the PROGRAM EDIT key again to exit pro- gram setting mode.

Adding more program tracks

You can add tracks to the end of an already set program.

1.Press the PROGRAM EDIT key on the remote control to put the unit into program setting mode.

2Press the PROGRAM EDIT key until the empty program step where it is possible to add a track appears. (No track number is displayed and the MEMORY indicator blinks.)

3Use the numeric keys or skip (Ô/Â, ¯/) keys to select a track and press the PROGRAM EDIT key.

4In this state, you can repeat step 3 to add more tracks, or you can press the PROGRAM EDIT key to exit program setting mode.

Time and text information display

You can set what type of time and text information is shown on the display.

Press the DISPLAY key on the main unit or the remote control to show for two seconds the type of information (playback time or text information) that is currently set to appear in the main area of the dis- play. Press this key again while this is being shown to change the type of information displayed.

The contents that can be displayed differ depending on the type of disc loaded, its status and the operation state of the unit.

DISPLAY key

DISPLAY key

Clearing the program

You can clear the entire program that has been set.

1Press the PROGRAM EDIT key on the remote control to put this unit into program setting mode.

2Press the PROGRAM EDIT key until the empty pro- gram step appears. (No track number is displayed and MEMORY blinks.)

3Press the STOP key. “-CLEAR-” appears on the display. After the program is cleared, program set- ting mode resumes without any tracks added to the program.

In addition to the above procedure, opening the disc tray also clears the program.

Audio CDs with CD text

When stopped, the display cycles through total time, album title and album artist. When playing back or paused, the display cycles through track elapsed time, track remaining time, total remaining time, track title and track artist.

Audio CDs without CD text

When stopped, playback time is displayed. When playing back or paused, the display cycles through track elapsed time, track remaining time and total remaining time.

Data CDs

When stopped, the display switches between total number of tracks and album title (current folder). When playing back or paused, the display cycles through track elapsed time, title, artist and file.

20 TASCAM CD-200