Tascam CD-200 Programmed playback, Setting the program, The selected playback mode is retained even when the power is turned off, MEMORY, Display, SHUFFLE, PROGRAM, EDIT key

4 − Playing back CDs

PLAY MODE

INTRO CHECK key

Display	Playback mode
No indication	Continuous playback
SHUFFLE	Shuffle playback
MEMORY	Programmed playback

The selected playback mode is retained even when the power is turned off.

•• Immediately after pressing the PLAY MODE/INTRO CHECK key, the selected mode is shown on the main display area as follows.

Continuous playback mode set: CONTINUE

Shuffle playback mode set: SHUFFLE

Programmed playback mode set: PROGRAM

•• In this manual, unless stated otherwise, explanations are given assuming that continuous playback mode is set.

Programmed playback

To use programmed playback, you must set a program either before or after setting the playback mode to programmed playback mode. (See “Select the playback mode” on page 17.)

When in programmed playback mode, press the PLAY/ READY key on the main unit or the remote control to start playback of the set program in order from the first track (program step 01). Press a SEARCH Ô/ (Â/¯) key on the main unit or a search (Ô/Â, ¯/) key on the remote control to skip to the previous or next program step.

In programmed playback mode, when playback is stopped the total number of tracks in the program and the total program time are shown (total program time is not shown when using a data CD).

Setting the program

When no program is set, follow the procedures below to set a program using the remote control.

•• The program cannot be set from the main unit.

•• You can set a program at any time regardless of the current playback mode.

•• The program is cleared when the disc tray is opened.

1Press the PROGRAM EDIT key while playback is stopped.PROGRAMEDIT key

18 TASCAM CD-200