The unit enters program setting mode, and if no program has been set, it will be possible to set a track to program step 01 (MEMORY indicator blinks).

[Audio CD][Data CD]

If the program is already set, the track number and playback time of the track set as program step 01 is shown. (See “Checking the program” on page 19.)

2Use the numeric keys or search (Ô/Â, ¯/) keys to select a track to set as program step 01. (The MEMORY indicator and the track number blink.) When using the numeric keys, input the number starting with the leftmost digit.

Program step
Track number

Playback time

[Audio CD]

[Data CD]

•• When using a data CD, the screen switches to file name display if more than a second passes

after pressing a numeric key or search (Ô/Â,

¯/) key, but it is still possible to add the track to the program.

•• If you press the STOP key while a track is selected, selection of that track is canceled, and the screen returns to the state where you can select a track.

3Press the PROGRAM EDIT key.

The selected track is added to program step 01. The unit is now ready for you to add another track for the next program step.

4 − Playing back CDs

4By repeating steps two and three above, you can add more tracks sequentially as desired.

5If you are finished adding tracks to the program, press the PROGRAM EDIT key when the empty program step where it is possible to add a track appears. The unit exits program setting mode.

•• The same track can be added to the program multiple times.

•• If you press the STOP key when the empty program step where it is possible to add a track appears, all steps in the program are cleared.

•• If you try to add more than 99 tracks, a “PGM FULL” error message appears. Only 99 tracks can be added.

Checking the program

You can check the contents of the program.

1Press the PROGRAM EDIT key on the remote control to put the unit into program setting mode.

The track number and playback time of the track set as program step 01 is shown on the screen (playback time is not displayed if the loaded disc is a data CD) and MEMORY blinks.

Program step

Track number Playback time

2Press the PROGRAM EDIT key to show the track information of the next program step.

3If you press the PROGRAM EDIT key when the final program step is shown, it becomes possible to add another program step. (No track number is dis- played and the MEMORY indicator blinks.)

4Press the PROGRAM EDIT key again to exit the pro- gram setting mode.

TASCAM CD-200 19