Tascam CD-200 Repeat playback, Pitch control, Repeat playback is OFF, Pitch can be adjusted by ±12.5%, All tracks* are played back repeatedly, ALL, ALL, REPEAT, Press the

•• After pressing the DISPLAY key, the currently selected type of information to be shown on the main display appears for two seconds as follows.

Track elapsed time: ELAPSED

Track remaining time: REMAIN

Total remaining time: T REMAIN

Album/track title: TITLE

Album/track artist: ARTIST

File name: FILENAME

•• The text information that can be shown on the display is ID3 tag information for data CDs and CD text information for audio CDs. When this information is not included for a disc or file or the information contains characters that cannot be displayed, “NO TITLE” (title information) or “NO NAME” (artist information) is shown.

•• When an audio CD is in programmed playback mode the elapsed time and remaining time of the entire program is shown.

•• The display contents setting is retained even when the power is turned off.

Repeat playback

You can play a selected track or all tracks repeatedly.

Press the REPEAT key on the main unit or the remote control to select from one of the following repeat modes.

4 − Playing back CDs

All repeat (REPEAT and ALL indicators appear):All tracks* are played back repeatedly.

**When set to folder playback with a data CD, all tracks in the folder are repeated. When using programmed playback, all tracks in the program are repeated.

Off (no indicator on the display):Repeat playback is OFF.Turning repeat playback OFF:

Press the REPEAT key on the main unit or the remote control until the ALL and REPEAT indicators do not appear.

•• If single repeat playback is turned ON during play- back, the current track is played back repeatedly. If all repeat playback is turned ON during playback, playback continues as it is until the end of the disc or current folder is reached. Then, playback continues from the beginning of the disc or current folder.

If repeat playback is turned ON when stopped, repeat playback begins when the PLAY/READY key is pushed.

•• The repeat function’s ON/OFF state is retained even when the power is turned OFF.

Pitch control

Using pitch control playback, CDs can be played back at a different pitch (sound frequency and playback speed).

Follow the procedures below to use pitch control playback.

REPEAT key

REPEAT key

Single repeat (REPEAT indicator appears):The selected track is played back repeatedly.

PITCH CONTROL knobPITCH CONTROL keyPITCH CONTROL indicator

1Press the PITCH CONTROL key on the main unit to turn pitch control playback ON.

The indicator above and to the left of the PITCH CONTROL key lights.2Use the PITCH CONTROL knob to set the pitch. Pitch can be adjusted by ±12.5%.

To turn pitch control playback OFF, press the PITCH CONTROL key on the main unit again.

The PITCH CONTROL indicator goes off and pitch control playback turns OFF.

TASCAM CD-200 21