Tascam CD-200 5IMPORTANT− MessageSAFETYLists PRECAUTIONS6 − Troubleshooting, ªª No power, ªª Remote control doesn’t work, ªª No sound, ªª There is unwanted noise

5IMPORTANT− MessageSAFETYLists PRECAUTIONS6 − Troubleshooting

If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center.

ªª No power

eCheck the connection to the AC power supply.

ªª Remote control doesn’t work.

eCheck to see if the batteries are properly installed in the remote control.

eIf the batteries are dead, change the batteries.

ªª No sound

eCheck the connection to the monitor system again. eCheck the volume and settings of the amplifier.

ªª There is unwanted noise.

eAre the connecting cables all properly connected and functioning?

ªª A CD cannot be played back.

eIf you are using a data CD with MP3 files, confirm that the file bit-rates are compatible with this unit.

eIs the disc scratched or dirty?

ªª The files on a data CD cannot all be played back.

eIs the unit in folder playback mode?

24 TASCAM CD-200