Voltage Conversion
(For general export models)
Be sure to remove the power cord from the AC outlet before repositioning the voltage converter switch.
1.Locate the voltage selector on the rear panel.
2.Using a
Rack mounting
Install this deck with the provided mounting screw kit as illustrated.
Connections
OBefore connection, turn off all compo- nents and pay special attention to left (L) and right (R) channel indications.
ORead the owner's manual of each com- ponent you intend to use with this unit.
∑Power cord
Be sure to connect the power cord to an AC outlet which supplies the correct voltage.
∑Headphones
When using headphones, connect the headphone plug into the PHONES jack.
OAdjust the level of the signals output from the phones jack.
∑ Signal cords
LINE IN / OUT terminals |
|
Connect the LINE IN terminals to the TAPE |
|
REC terminals and connect the LINE OUT |
|
terminals to the TAPE PLAY terminals of the |
|
stereo amplifier using RCA pin plug cords. |
|
O LINE OUT terminals output the compact |
|
disc or cassette deck tape signal. When |
|
both compact disc and tape are played |
|
back, the tape sound has priority. |
|
CD LINE OUT terminals |
|
Connect the CD LINE OUT terminals to the |
|
CD, DAT or AUX terminals of the stereo |
|
amplifier using RCA pin plug cords. |
|
O CD LINE OUT terminals always output |
|
the disc signal. |
|
Caution: |
|
If the CD player interferes with the tuner, TV |
|
reciever, etc., allow a reasonable distance |
|
between them. |
|
Stereo Amplifier
_ 5 _
