6 − After recording
Erasing
Erasing tracks
This operation erases the specified track and all
NOTE
Once this operation has started, the STOP key cannot be used to cancel it. Please check the track range to be deleted first.
Erasing track is operated only when unit is in continu- os playback.
1.While stopped, press the ERASE/DEL key on the front panel or the ERASE key on the remote control. Select the ERASE TRACK? rotating the MULTI JOG dial or pressing the SKIP key on the remote control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE key again.
2.Push the MULTI JOG dial or press the ENTER key to enter the function.
The display shows Erase
the first track and last track to be erased).
Rotate the MULTI JOG dial or press the SKIP key to change the track numbers you desire to erase.
To cancel the operation at this point, press the ERASE/DEL or the ERASE key again.
3.Push the MULTI JOG dial or press the ENTER key to operate the function.
The display shows Sure?
To cancel the operation at this point, press the
STOP key.
4.Push the MULTI JOG dial or press the ENTER key again to proceed the operation.
The display shows Erase flashing and the remaining time. The unit starts counting down from a time shown on the display.
5.When the tracks have been erased, Completewill appears on the display.
Erasing a whole disc
When you want to erase a whole disc (all the tracks on a disc), follow the procedure below:
NOTE
Once the operation is proceeded, the STOP key cannot function. Please confirm before the operation.
1.While stopped, press the ERASE/DEL key on the front panel or the ERASE key on the remote control. Select the ERASE DISC?by rotating the MULTI JOG dial or pressing the SKIP key on the remote control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE key again.
2.Push the MULTI JOG dial or press the ENTER key to enter the function. The display shows Sure?
To cancel the operation at this point, press the
STOP key.
3.Push the MULTI JOG dial or press the ENTER key again to proceed the operation.
The display shows Erase flashing and the remaining time. The unit starts counting down from a time shown on the display.
4.When the disc has been erased, Completeappears then Blank Discwill appear on the display.
Refreshing a disc
Refreshing the disc makes a disc usable again. This opera- tion destroys all data on the disc.
1.Load the disc, and the unit in stop mode, press the ERASE/DEL key on the front panel or the ERASE key on the remote control. Select the REFRESH? rotating the MULTI JOG dial or pressing the SKIP key on the remote control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE key again.
2.Push the MULTI JOG dial or press the ENTER key on the remote control to enter the function. The display shows Sure?
To cancel the operation at this point, press the STOP key.
3.Push the MULTI JOG dial or press the ENTER key again to proceed the operation.
The display shows Erase flashing and the remaining time. The unit starts counting down from a time shown on the display.
4.When the disc has been refreshed, Completeappears
then Blank Disc will appear on the display.
TASCAM
