IMPORTANT SAFETY INSTRUCTIONS
TASCAM CD-RW900SL 33
8 − Reference and specifications
TASCAM CD-RW900SL 33
Troublshooting

Symptom Possible cause and remedy

There is no power to the unit. Please check the power cord is properly plugge d in.
“Disc Error!”, or “OPC Error!” is displayed. The disc may be dirty. Please replace the disc.
Playback is not possible. This may be due to condensation. In this case, remove the disc, turn the
power on and wait a few hours, then try again.
No sound is output. • Confirm the connections with the audio system.
• Check the volume level, and proper amplifier o peration.
Recording is not possible. • Confirm the connections with the audio system.
• Adjust the recording level.
• The disc may be for playback only. Please replace with a recorda ble disc.
Noise or static can be heard. Please re-p osition the unit away from strong source of magnetism such
as a television.
The unit does not retain settings. While settings are retained each time they are made, in so me case they
will not be retained when the power is turned off too soo n. To prevent
this from happening, do not turn off the power right af ter making a seting.
Can’t insert a disc. Take the disc out and press the EJECT key to reset. Then try again.
Never use force to insert the disc into the slot.