1 − Introduction
Thank you for your purchase of the TASCAM
Before connecting and using the unit, please take time to read this manual thoroughly to ensure you understand how to properly set up and connect the
NOTE
This product is designed to help you record and repro- duce sound works to which you own the copyright, or where you have obtained permission from the copyright holder or the rightful licensor. Unless you
own the copyright, or have obtained the appropriate permission from the copyright holder or the rightful licensor, your unauthorized recording, reproduction or distribution thereof may result in severe criminal penalties under copyright laws and international copyright treaties. If you are uncertain about your rights, contact your legal advisor. Under no circum- stances will TEAC Corporation be responsible for the consequences of any illegal copying performed using the
Supplied accessories
In addition to this manual, the |
|
packed with the following: |
|
• | 1 |
• AC power cable | 1 |
• A | 1 |
• A warranty card | 1 |
• AAA batteries for the remote control unit | 2 |
Contact your TASCAM supplier if any of these items are missing.
NOTE
The batteries are not supplied for Taiwan.
Rack-mounting the unit
If you are mounting the unit in a rack, leave 1U of space above it and 4 inch (10 cm) or more of space at the rear.
Use the
About this manual
In this manual, we use the following conventions:
•The names of keys and controls are given in the follow- ing typeface: ERASE.
•When the alphanumeric portion of the display shows
a message, this is shown in the following typeface: Complete.
•If a preset indicator in the display (i.e. one which cannot change, but is either on or off) is shown, this is shown as follows: RANDOM.
•Selectable value (i.e. values of dB) or ON and OFF selection (i.e. SRC>XXX) is shown in the following typface: XXX.
TASCAM
