Tascam MD-301mkII user service Assigning Titles Title Function

Buttons used on this page

6.Select each character by turning the [µTRACK≤] dial and pressing

[PUSH ENTER] on the dial.

…If you are using the remote control unit, select each character with the [µ TRACK≤] buttons and press the

[ENTER] button to enter it.

7.Repeat steps 5-6.

8.Press the [YES] button after assigning

the disc title.

…The title entry mode for track 1 is automatically engaged ("001 > _" is displayed) and the cursor blinks on the display.

Assigning Titles (TITLE Function)

Titles can be assigned to each disc or each track using uppercase and lowercase

letters, numbers, "" (Katakana) and symbols.

1.Press the [EDIT/NO] button so that "TITLE ?" is displayed.

2.Press the [YES] button.

…Press the [TITLE EDIT] button if you are

using the remote control unit.

3. Select "DSC" or a track number using the [µTRACK≤] dial.

…To assign a disc title, select "TITLE > DSC" ("DSC" blinks).

…To assign a track title, select "TITLE > XXX (track number)" (Track number blinks).

4. Press the [YES] button.

"DSC > _ " or "XXX > _ " is displayed.

…The character entry mode is engaged and the cursor blinks on the display.

5.Press the [DISPLAY] button to select the character type.

…When "" is lit: Katakana (square Japanese syllabary) can be entered.

…When "" is lit: Capital alphabet letters, numerals and symbols can be entered.

…When no indicator is lit: Small alphabet letters, numerals and symbols can be entered.

6.Select each character by turning the [µTRACK≤] dial and pressing [PUSH ENTER] on the dial.

7. Repeat steps 5-6.

…Press the[ªSTOP] button to abort the operation.

…Press the [EDIT/NO] button for more than 3 seconds (or press the [TITLE EDIT] button on the remote control unit) to

cancel the title function and resume playback

8. Press the [YES] button again.

…The disc or track title is displayed again.

…Repeat steps 1-8 to assign titles to other track numbers.

Assigning Titles to the Disc and All Tracks Successively (TITLE AUTO INC Function)

Select the "CONTINUE" mode with the [PLAY MODE] button. Titles can be assigned to the disc and all tracks successively.

1.Press the [EDIT/NO] button so that "TITLE ?" is displayed.

2.Press the [YES] button.

…Press the [TITLE EDIT] button if you are using the remote control unit.

3.Select "TITLE > AINC" with the [µTRACK≤] dial ("AINC" blinks).

4.Press the [YES] button.

…The disc title entry mode is engaged ("DSC > _" is displayed) and the cursor blinks on the display.

…The cursor blinks at the first character position even if a title has already been assigned.

5.Press the [DISPLAY] button to select the character type.

ENGLISH

9.Repeat steps 5-6.

10.Press the [YES] button again.

…When the title entry mode for track 2 is engaged ("002 > _" is displayed), repeat steps 5-8.

…Repeat the character entry procedure until all titles have been entered. The disc title is then displayed if the deck is in the Stop mode, or if the deck is in the Play mode, the current track title is displayed.

…Confirm titles by turning the [µTRACK≤] dial.

…Press the [ªSTOP] button to abort the operation.

Press the [EDIT/NO] button for more than 3 seconds (or press the [TITLE EDIT] button on the remote control unit) to cancel the title function and resume playback.

Notes:

…Up to 100 characters can be entered per track title. However, when the total number of characters of all track titles exceeds 1700, no more track titles can be written onto the MD.

…If the TITLE AUTO INC function is canceled before all titles have been assigned, the track title currently being entered will be erased. Only track titles which have already been assigned will be kept.

…If UNDO is performed after TITLE AUTO INC is completed, the last edited track title will be canceled.

…Disc and track titles can be assigned during recording.

…If a track title is assigned while in the Record-Ready mode during the overwrit- ing of a track, the track title will be erased when you resume recording.

…"DISC" lights while a disc title is being entered, and "TRACK" lights while a track title is being entered.

…Assigning titles is unavailable in the "SHUFFLE MODE" or "PGM MODE".

– 17 –