Tascam MD-301mkII user service Repeating Tracks Repeat Playback, Timer Playback

Useful Tips for Playback

Buttons used on this page

Repeating Track(s)

(Repeat Playback)

All or one of the tracks, or a specified portion (A-B) of an MD can be played repeatedly. Program playback and Shuffle playback can also be repeated.

ªTo repeat all MD tracks

(All-track repeat)

1.In the Stop mode, press the [PLAY MODE] button to select one of the following repeat play modes.

Play Mode	Repeat
CONTINUE	Normal repeat
SHUFFLE MODE	Shuffle repeat
PGM MODE	Program repeat

2.Press the [REPEAT] button on the remote control unit once to display "REPEAT

ALL".

…"" lights up.

3. Press the [¥PLAY] button.

The tracks will be played repeatedly in the specified mode.

…To release REPEAT playback and resume normal playback, press the [REPEAT] button repeatedly until "REPEAT OFF" appears.

…The Repeat Playback mode will not be canceled even when the power is turned off.

ªTo repeat a single track

(Single-track repeat)

1. During playback in the "CONTINUE MODE", press the [REPEAT] button on the remote control unit twice.

…"REPEAT 1" appears ("" and

" " light up).

2.Press the [¥PLAY] button. The current track will be repeated.

3.The track to be repeated can be changed by turning the [µTRACK≤] dial or by pressing the [µTRACK≤]

buttons or numeric buttons (1 to 9, 0, +10) on the remote control unit.

…Single-track repeat is unavailable in the "SHUFFLE MODE" or "PGM MODE".

ªTo repeat a section within a track

(A-B repeat)

A specified portion (between A and B) of a track can be played repeatedly.

1.During playback, press the [A-B] button on the remote control ("REPEAT A–" is

displayed, and "		" lights up,
"	" blinks) at the starting point (A) of

the portion you want to repeat.

2. Press the [A-B] button again ("REPEAT A-

B"	is displayed, and "	" and
"	" light steadily) at the ending point

(B). The portion (A-B) will be played repeatedly.

…A-B repeat playback of portions extending over more than one track is not possible during programmed playback or shuffle playback.

…To cancel Repeat playback and resume normal playback, press the [A-B] button or [REPEAT] button again.

("REPEAT OFF" is displayed.)

…Press the [ªSTOP] button to erase the specified portion (between A-B).

Timer Playback

By connecting this deck with a timer (commercially available), playback can be started at a specified time.

1.Insert a pre-recorded MD and set the [TIMER] switch to [PLAY].

2.Select the amplifier's input which allows this deck to play back.

…Timer playback is available when "SHUFFLE MODE", "PGM MODE", "ALL REPEAT" or "REPEAT SINGLE" playback is

selected.

3.Set the timer to the desired start time and turn off the power.

When the set time comes, each

component will be turned on and playback will start.

…Set the [TIMER] switch back to [OFF] after timer playback.

– 14 –