Using the Timers
Continued
There are three timers available — Daily Timer, Recording | 2 Press CLOCK/TIMER again. |
Timer, and Sleep Timer. | |
Before using the timers, you need to set the clock built in the | “ON TIME” appears for 2 seconds, then the |
unit enters | |
unit. (See “Setting the Clock” on page 9.) |
|
CLOCK / TIMER
Using Daily Timer
With Daily Timer, you can wake to your favorite music or radio program. You can set the timer whether the unit is on or off.
How Daily Timer actually works
The unit automatically turns on, set the volume level to the preset level, and starts playing the specified source when the
The timer setting remains in memory until you change it.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
•If you have made a mistake while setting timer, press CANCEL. (However, this does not always work. If CANCEL does not work, press CLOCK/TIMER repeatedly and start from step 1 again.)
Before you start...
•When using a CD as the source to play —
–Make sure there is a CD on the currently selected disc number tray.
•When using a tape as the source to play —
–Make sure that a tape is in the deck whose deck indicator (A or B) is lit on the display.
•When using the external component as the source to play —
–Set the timer equipped with the external component at the same time.
On the unit ONLY: |
|
1 Press CLOCK/TIMER repeatedly | / TIMER |
| CLOCK |
until “DAILY” appears on the |
|
display. |
|
indicator lights up and the DAILY (daily timer) indicator also starts flashing on the display.
•Each time you press the button, the timer setting modes change as follows:
DAILY ON TIME REC
Canceled CLOCK ON TIME
(See page 9.)
3 Set the |
| PRESET |
to turn on. |
|
|
|
|
1)Press 4 or ¢to set the hour, then press SET.
2)Press 4 or ¢to set the minute, then press SET.
| “OFF TIME” appears for 2 seconds, then |
| SET | |
| the unit enters |
|
| |
4 Set the |
| PRESET | ||
to turn off (on standby). |
|
|
| |
1) | Press 4 or ¢to set the hour, then |
|
| |
|
| |||
| press SET. |
|
| |
2) | Press 4 or ¢to set the minute, |
|
| |
| then press SET. |
|
|
The unit enters source selecting mode. | SET |
|
5 Press 4or ¢to select the |
| PRESET |
source to play, then press SET. |
|
|
•Each time you press 4 or ¢, the source changes as follows:
TUNER FM TUNER MW TUNER LW
SET
AUX TAPE CD
TUNER FM: tunes into a specified preset FM station.
=go to step 6.
TUNER MW: tunes into a specified preset MW station.
=go to step 6.
TUNER LW: tunes into a specified preset LW station.
=go to step 6.
CD:plays a disc from the first track.
=go to step 7.
TAPE: plays a tape in deck A or B. =go to step 7.
AUX:plays an external source. = go to step 7.