Connecting Other Equipment
You can connect both analog and digital equipment.
•DO NOT connect any equipment while the power is on.
•DO NOT plug in any equipment until all connections are complete.
To connect an analog component
Be sure that the plugs of the audio cords are color coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.
Connect an optical digital cord (not supplied) between the optical digital input terminal on the other equipment and the DIGITAL OUT [OPTICAL] terminal.
NOW, you can plug in the unit and other connected equipment FINALLY!
Cancelling the Display Demonstration
When connecting the AC power cord into a wall outlet, the unit automatically starts display demonstration.
On the unit ONLY:
To audio output
AUX IN
Audio/video equipment
To cancel the display demonstration, press | /DEMO |
| CANCEL |
DEMO. |
|
When you press other buttons
The display demonstration stops temporarily. It will start automatically again (if no operation is done for 2 minutes) until you cancel it by pressing DEMO.
For playing the other equipment through this unit,
connect between the audio output jacks on the other equipment and AUX IN jacks by using audio cords (not supplied).
To connect audio equipment with an optical digital input terminal
You can record CD sound onto the connected digital equipment.
DIGITAL OUT | Protective |
[ OPTICAL ] | plug |
|
To start the display demonstration manually
Press and hold DEMO again for more than 2 | CANCEL |
/DEMO | |
seconds. |
|
To optical digital input
Before connecting the other equipment, remove the protective plug from the terminal.
Audio equipment with an optical digital input
