Recording
Continued
IMPORTANT:
•It should be noted that it may be unlawful to
•The recording level is automatically set correctly, so it is not affected by the VOLUME control, the SOUND MODE control and the SUBWOOFER LEVEL control. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level.
•While recording, you can hear sound modes through the speakers or headphones. However, the sound is recorded without these effects (see page 10).
•If recordings you have made have excessive noise or static, the unit may be too close to a TV. Place the unit away from the TV.
•You can use type I tape for recording.
To protect your recording Cassettes have two small tabs
on the back to protect
unexpected erasure or re- recording.
To protect your recording, remove these tabs.
To
To keep the best recording and playback sound quality
If the heads, capstans, and pinch rollers of the cassette decks become dirty, the following will occur:
•Impaired sound quality
•Discontinuous sound
•Fading
•Incomplete erasure
•Difficulty in recording
To clean the head, capstan, and pinch roller
Use a cotton swab moistened with alcohol.
Capstan
Erase head
Pinch roller
Head
To demagnetize the head
Turn off the unit, and use a head demagnetizer (available at electronics and audio shops).
Recording a Tape on Deck B
On the unit ONLY:
1 Press EJECT 0 for the deck B.
2
3
4 Start playing the source — FM, MW, LW, CD player or auxiliary equipment connected to AUX IN jacks.
•When you want to use the dubbing method, see “Dubbing Tapes” on page 19.
•When the source is CD, you can also use CD Synchro Recording (see “CD Synchro Recording” on page 19.)
5 Press REC START/STOP. | REC START CD |
| /STOP REC |
The REC (recording) indicator lights up on the display and recording starts.
To stop during recording, press REC START/STOP again or 7.
