Pioneer GM-6400F owner manual Connections when using the RCA input jack, Connecting the units

Section

03 Connecting the units

Connections when using the RCA input jack

Connect the car stereo RCA output jack and the RCA input jack of the amplifier.

Four-channel / Three-channel output ! Slide INPUT SELECT (input select) switch

to 4CH position.

1 RCA input jack A

For two-channel output, connect the RCA plugs to the RCA input jack A.

2 Connecting wire with RCA pin plugs (sold se- parately)

3 From car stereo (RCA output)

1RCA input jack A

2RCA input jack B

3Connecting wires with RCA plugs (sold sepa- rately)

4From car stereo (RCA output)

If only one input plug is used, e.g. when the car stereo has only one output (RCA output), connect the plug to RCA input jack A rather than B.

Two-channel output (Stereo) / (Mono)

!Slide INPUT SELECT (input select) switch to 2CH position.

Connections when using the speaker input wire

Connect the car stereo speaker output wires to the amplifier using the supplied speaker input wire.

!Do not connect both the RCA input and the speaker input at the same time.

1Car Stereo

2Speaker output

3White: CH A, Left +

4White/black: CH A, Left *

10 En